Hello guest
0
Your basket is empty
Professional Audio Solutions Provider  |  Tel +44 (0)118 938 0683 
 

Neutrik NAC3MPB-1-WOT Powercon Mains Output 3 Pin 20 Amp Chassis (Code: 20079)£2.00

Click on an image to view a larger version
Neutrik NAC3MPB-1-WOT 
 
Power out, air-tight D chassis connector with flat tab terminals. 
The NAC3MPB -1-WOT has no rear cover allowing extra access to the terminals useful when soldering large cables 
A Locking 3 conductor equipment AC connector, contacts for line, neutral and pre-mating ground contact. 
With a fast and easy locking system and high current capacity (20 A rated) the NAC3MPB -1-WOT is extremely robust and reliable. Meets all prevailing safety standards, UL recognized, VDE certified and SEV approved. Very good cable handling and protection. Note: The PowerCON is a connector without breaking capacity, i.e. the PowerCON should not be connected or disconnected under load or live! 
Number of contacts: 3 - for line, neutral and predating safety ground 
Rated current per contact: 20 A rms 
Rated voltage: 250 V ac 
Dielectric strength: 4000 V dc 
Chassis shape: D 
Wiring: Flat tabs for 3/16in (FASTON 4.8 x 0.5 mm) or soldering 
Locking device: Quick Lock 
 
NAC3FCA and NAC3MPA-1 are used for ‘power in’ to a unit 
NAC3FCB and NAC3MPB-1 are used for ‘power out’ of a unit 
Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating. Branded with unique hologram - guarantees genuine and authentic Neutrik product 
Quantity:

Customers who bought this product also purchased…

Also in Powercon…

Designed and created by it'seeze